NEWS & KNOWLEDGE
Explore product technology, application engineering, manufacturing developments and project guidance from Reluxlight.
The UK has granted development consent for the proposed Steeple Renewables Project, combining about 450 MW of solar generation and 150 MW of battery storage. Consent is a planning milestone, not evidence of construction or operation.
Explore topic →Maryland's Public Service Commission conditionally selected two storage projects totaling 440 MW under its first-round procurement. The awards support financing but still require construction approvals and further review.
Explore topic →The U.S. Department of Energy issued a final environmental assessment and FONSI for proposed solar and battery-storage facilities in Puerto Rico. The finding is a review milestone, not an approval to operate.
Explore topic →ACME Solar reports 107.36 MW / 437.49 MWh of additional battery capacity in Rajasthan, disclosed through its press release and an exchange announcement. The update concerns named BESS capacity, not a solar-lighting project.
Explore topic →NYSERDA awarded eight bulk battery-storage projects totaling 950 MW. The contracts are a procurement milestone, not evidence that the sites are built or operating.
Explore topic →Vattenfall has taken a final investment decision for a 254 MW, up-to-1,000 MWh battery at Brunsbüttel. The decision advances a future project; it is not operating-performance evidence.
Explore topic →ACWA Power says the Red Sea destination's renewable utility system has reached commercial operation with solar generation and battery storage. It is an external project, not a Reluxlight installation.
Explore topic →Georgia Power says its 128 MW Robins Battery Facility has entered commercial operation near Warner Robins, paired with a nearby solar facility. It is an external project, not a Reluxlight installation.
Explore topic →Energy Vault says it has acquired the project land for the proposed 125 MW / 1 GWh Stoney Creek battery project in New South Wales. The milestone advances development; it is not a commissioning result.
Explore topic →CrossBoundary Energy reports commercial operation of a solar-and-battery baseload facility for Kamoa Copper in the Democratic Republic of the Congo. Buyers should separate the reported operating milestone from configuration-specific performance guarantees.
Explore topic →Lancaster City Council has approved a solar-canopy EV charging hub with battery storage and solar-powered lighting. The approval is a useful public-project reference, not evidence of a completed installation.
Explore topic →
Torbay Council says three-quarters of almost 15,000 highway lights have been upgraded with LED and central-management equipment.
Explore topic →Quezon City published award, notice-to-proceed and purchase-order documents for an LED streetlight procurement on August 31.
Explore topic →Odisha procurement listings include solar-lighting arrangements at municipal pump houses, requiring clear autonomy and maintenance boundaries.
Explore topic →The U.S. Virgin Islands Energy Office reports an initial battery virtual-power-plant test across 120 sites, illustrating why controls, communications and measured response matter.
Explore topic →The European Commission has updated guidance for the Digital Batteries Passport, helping battery-sector organisations prepare information systems before the 2027 requirements apply.
Explore topic →EIA reports nearly 52 GW of U.S. battery nameplate capacity by mid-2026, a useful reminder to separate power, usable energy and operating profile in solar-storage design.
Explore topic →New Jersey has issued a proposal for about 150 MW of distributed storage that would reward verified performance, reinforcing the value of clear controls, metering and handover records.
Explore topic →A Czech public procurement notice seeks photovoltaic generation and battery storage for water-treatment sites near Znojmo. The notice shows why power and energy ratings must be read together.
Explore topic →Colombia awarded solar capacity paired with about 100 MW of batteries, using delivery windows that clarify what storage must do after solar output falls.
Explore topic →Sungrow reports commissioning the RESPITE solar-plus-storage project in Sierra Leone with 35 MWh of storage, highlighting the interfaces behind reliable operation.
Explore topic →The DesignLights Consortium's NLC V5.2 requirements update networked-lighting controls with stronger attention to configuration reporting and system integration.
Explore topic →The UK government's updated solar deployment dataset provides a current market reference, while showing why national capacity is not a site-performance guarantee.
Explore topic →California has surpassed 21 GW of grid-connected energy storage. The milestone underlines why usable energy, controls and serviceability matter alongside a battery's headline capacity.
Explore topic →
A remote Australian cattle station has installed a renewable microgrid as its primary power source. The project highlights the importance of load definition, storage autonomy, controls and field service for off-grid assets.
Explore topic →Sol-Ark has introduced an installer-focused app for residential solar-plus-storage commissioning. Buyers should treat software, permissions and support as part of the inverter specification.
Explore topic →Array has surpassed 100 GW of cumulative tracker deliveries across more than 30 countries. Scale supports bankability review, but wind, terrain, module and service evidence remain project-specific.
Explore topic →NASA's Earth Observatory has documented the Green River Energy Center in Utah, a 400 MW solar and 400 MW battery project. Its scale is a useful reference, but not a sizing template for other sites.
Explore topic →
Qnetic says it is assembling a 200 kWh flywheel prototype and has begun Shanghai test-cell construction. The announcement is an early technology signal, not an independently proven alternative to deployed battery systems.
Explore topic →IEA PVPS has updated its photovoltaic life-cycle inventory benchmark. The report gives buyers a better starting point for environmental comparisons, but it does not replace product-specific evidence.
Explore topic →SEIA has published inverter and supply-chain cybersecurity guidance. For buyers, the immediate step is to turn security claims into testable controller, access and support requirements.
Explore topic →BC Hydro and British Columbia are advancing a proposed utility-scale battery project near Duncan. The early supplier-qualification stage is a signal to prepare evidence, not a completed equipment award.
Explore topic →Idemitsu has outlined a proposed vanadium flow battery at a former New South Wales coal-mine site. The project is a planning signal, not proof of completed performance.
Explore topic →Enphase says European owners of IQ Battery 3T and 10T systems can now add backup and newer 5P storage without discarding installed batteries. Buyers should verify each site's supported configuration before ordering.
Explore topic →Ofgem has opened a new call for input on special licence conditions for the first UK long-duration electricity storage projects. Here is what energy buyers and project teams should review now.
Explore topic →
SunPower has completed a 977 kW solar carport system at a 330-unit California community. The project highlights design, service and verification priorities for distributed-energy buyers.
Explore topic →PowerBank has signed a lease for a proposed 3.2 MW community solar project in New York. The early-stage announcement shows which milestones buyers should verify before treating capacity as deliverable.
Explore topic →
Charlottesville's new Fire Station 1 has earned LEED Gold with rooftop solar, daylighting and light-pollution measures. The project offers practical lessons for public-infrastructure buyers.
Explore topic →
The European Commission has opened its Digital Product Passport information hub. Here is what solar-lighting buyers should prepare for battery traceability and documentation.
Explore topic →
The EU has published a renewable-project participation toolbox. Solar-lighting project teams can use its principles to reduce approval, trust and community-engagement risk.
Explore topic →
The UK is expanding solar installations for schools and reports additional savings where lighting was upgraded to LED. Here are the project and procurement lessons.
Explore topic →The UK plans a regulated route for compliant plug-in solar devices. The rule is not for solar lights, but its safety and documentation lessons matter to product buyers.
Explore topic →Explore integrated, semi-integrated and split road systems plus garden, flood, lawn and wall lighting.
Explore topic →
Start with the use environment, then align product architecture, optics, energy capacity, controls and maintenance.
Explore topic →
A practical workflow covering location, road geometry, illumination targets, operating hours, autonomy, architecture and quantity.
Explore topic →
Compare installation, solar orientation, capacity, serviceability and best-fit applications before selecting wattage.
Explore topic →